If you find this site helpful, please help and support us by making a donation.

Tag: howto & style

NK Forster Guitars – Making a bridge part 2

| November 3, 2008 | 0 Comments

Using a router to cut the saddle slot and remove some of the bulk. I was going to release the third part of this series but I’ve decided to save it for a DVD I’m making on guitar building. www.nkforsterguitars.com

http://www.youtube.com/v/VxUe8quGh6k?f=videos&app=youtube_gdata

See the rest here:NK Forster Guitars – Making a bridge part 2

Guitar Making Tools and Supplies

| September 10, 2008 | 0 Comments

www.LearnToMakeAGuitar.com – Des Anthony, An Experienced Custom Guitar Maker, talks about the best and quality tools you need to make your own custom guitar. For more info visit http

http://www.youtube.com/v/eTlAnqfJtY4?f=videos&app=youtube_gdata

Go here to see the original:Guitar Making Tools and Supplies

NK Forster Making a guitar: Back Struts 1

| February 19, 2008 | 0 Comments

Simple process really, just basic wood machining. I use quarter sawn European Spruce for my back struts, nothing else. Mark ’em out, cut them, rout to shape. Sand and mark the height, cut on the band saw and notch the back strips to receive them. Glue them on and there you have it! www.nkforsterguitars.com

http://www.youtube.com/v/1gFPDADllFw?version=3&f=videos&app=youtube_gdata

Here is the original post:NK Forster Making a guitar: Back Struts 1

Steve’s Guitar Making Part 8 – Finish 3 of 3

| November 10, 2007 | 0 Comments

French polish 3 of 3

http://www.youtube.com/v/jLt3hwLTQqo?f=videos&app=youtube_gdata

The rest is here:Steve’s Guitar Making Part 8 – Finish 3 of 3